1. Planning a flight using an ATR 72 aircraft takes a lot of experience and knowledge as a commercial pilot. It is important to understand the aircraft’s characteristics, capabilities and limitations before planning a flight. Knowing the aircraft’s characteristics, capabilities and limitations will help the pilot to plan the safest and most efficient flight possible. According to Pilot Career, the ATR 72 is a twin-engine turboprop aircraft that is used primarily for short-haul flights. It has a maximum range of 1,000 nautical miles, a maximum speed of 400 knots, and a maximum takeoff weight of 28,400 kilograms.
2. Before planning a flight using the ATR 72 aircraft, the pilot must consider several factors. The pilot should first determine the origin and destination of the flight. The pilot should also consider the weather conditions at the origin and destination, as well as the airspace regulations that may be applicable to the flight. According to Pilot Training, the pilot should also consider the weight and balance of the aircraft, the fuel requirements for the flight, and any special equipment that may be needed for the flight.

3. Once the origin and destination have been determined, the pilot should then determine the route for the flight. The pilot should consider the most direct route, as well as other factors such as weather, airspace regulations, and terrain. According to Airline Pilots, the pilot should also consider the type of airspace that the aircraft will be flying in, such as Class A, B, C, D, or E. The pilot should also consider the altitude that the aircraft will be flying at, and the speed of the aircraft.
4. After the route has been chosen, the pilot should then calculate the estimated time en route (ETE). The ETE is the estimated time that the aircraft will take to fly from the origin to the destination. According to Aircraft Pilots, the ETE can be calculated by using the aircraft’s performance tables. The performance tables will provide the pilot with the aircraft’s fuel consumption, airspeed, and range for a given altitude.
5. After the ETE has been calculated, the pilot should then calculate the aircraft’s fuel requirements for the flight. According to Commercial Pilot, the fuel required for the flight can be calculated by using the aircraft’s performance tables. The performance tables will provide the pilot with the aircraft’s fuel consumption, airspeed, and range for a given altitude. The fuel required for the flight should also include an extra allowance for contingencies, such as weather delays and air traffic control delays.
6. Once the fuel requirements have been calculated, the pilot should then calculate the aircraft’s weight and balance. The aircraft’s weight and balance must be calculated in order to ensure that the aircraft is properly balanced and that the aircraft is not overloaded. According to Pilot Career, the weight and balance can be calculated by using the aircraft’s performance tables. The performance tables will provide the pilot with the aircraft’s empty weight, maximum takeoff weight, and center of gravity.
7. After the weight and balance have been calculated, the pilot should then determine the type of navigation equipment that will be required for the flight. According to Pilot Training, the type of navigation equipment required for the flight will depend on the type of airspace that the aircraft will be flying in. The pilot should also consider the type of airspace that the aircraft will be flying in, such as Class A, B, C, D, or E.
8. After the navigation equipment has been determined, the pilot should then review the flight plan. The flight plan should include the origin and destination, the route of the flight, the estimated time en route, the fuel requirements, and the navigation equipment that will be used. According to Airline Pilots, the pilot should also review the weather at the origin and destination, the airspace regulations that may be applicable to the flight, and any special equipment that may be needed for the flight.
9. Before the flight can begin, the pilot should then review the aircraft’s pre-flight inspection. The pre-flight inspection should include a visual inspection of the aircraft’s exterior, as well as a review of the aircraft’s systems and equipment. According to Aircraft Pilots, the pre-flight inspection should also include a review of the aircraft’s fuel, weight, and balance.
10. After the pre-flight inspection has been completed, the pilot should then obtain a clearance from air traffic control. The clearance should include the origin and destination, the route of the flight, and the altitude that the aircraft will be flying at. According to Commercial Pilot, the clearance should also include any special instructions that may be applicable to the flight, such as restricted airspace, noise abatement procedures, or special navigation procedures. Once the clearance has been obtained, the pilot can then begin the flight.

1. What is the maximum range of the ATR 72 aircraft?
Answer: According to Pilot Career, the ATR 72 has a maximum range of 1,700 nautical miles.

2. How much fuel does the ATR 72 usually carry?
Answer: According to Pilot Training, the ATR 72 usually carries up to 4,000 lbs of fuel.
3. Is the ATR 72 an all-weather aircraft?
Answer: According to Airline Pilots, the ATR 72 is certified for all-weather operations.
4. What is the maximum cruise speed of the ATR 72?
Answer: According to Aircraft Pilots, the ATR 72 has a maximum cruise speed of 375 knots.
5. Can the ATR 72 fly at higher altitudes?
Answer: According to Commercial Pilot, the ATR 72 can fly up to 25,000 feet.
6. Is the ATR 72 pressurized?
Answer: According to Pilot Career, the ATR 72 is pressurized up to 8,000 feet.
7. What type of engine does the ATR 72 use?
Answer: According to Pilot Training, the ATR 72 is equipped with two Pratt & Whitney Canada PW127F turboprop engines.
8. Does the ATR 72 have autopilot capabilities?
Answer: According to Airline Pilots, the ATR 72 is equipped with an autopilot system.
9. What is the maximum takeoff weight of the ATR 72?
Answer: According to Aircraft Pilots, the ATR 72 has a maximum takeoff weight of 21,000 lbs.
10. Can the ATR 72 carry cargo?
Answer: According to Commercial Pilot, the ATR 72 can carry up to 5,000 lbs of cargo.