Sukhoi Superjet 100 Cockpit: Layout, Avionics and Features
The Sukhoi Superjet 100 cockpit is a two-pilot glass flight deck with large liquid-crystal displays, a flight management system and fly-by-wire controls operated through side-sticks. It is designed so that two crew members can fly regional sectors with moderate workload while keeping good situational awareness.
Updated October 2026 · Editorial team, Golden Epaulettes Aviation
This guide describes the main parts of the flight deck, how automation fits in and how it compares with other modern airliners. Detailed layouts and software versions vary by aircraft build, so check the operator's manuals for exact details.
Key facts: Sukhoi Superjet 100 cockpit
- Crew: two pilots, captain and first officer.
- Displays: large LCD screens for flight, navigation and engine information.
- Controls: fly-by-wire with side-stick controllers instead of control columns.
- Automation: flight management system, autopilot and autothrottle.
- Philosophy: similar in concept to other modern fly-by-wire airliners.
- Use: mainly Russian operators; not flown by Indian scheduled airlines to our knowledge.
Main layout of the flight deck
The flight deck follows a conventional pilot-flying and pilot-monitoring arrangement. Each pilot has primary flight and navigation displays in front, with shared engine and system displays in the centre.
| Area | What it contains | Purpose |
|---|---|---|
| Main panel | Primary flight displays, navigation displays, engine and alert displays | Core flight information in front of both pilots |
| Glareshield | Autopilot mode controls | Setting altitude, speed, heading and modes |
| Pedestal | Thrust levers, FMS control units, communication and navigation controls | Power control and flight planning inputs |
| Overhead panel | Electrical, fuel, hydraulic, air systems and engine start controls | System management and abnormal procedures |
| Side consoles | Side-stick controllers and tillers | Manual flying and ground steering |
Panel names and exact layouts differ by manufacturer documentation, so treat this table as a general guide.
Fly-by-wire and side-sticks
The aircraft uses electronic flight controls. Inputs from the side-stick are interpreted by computers that apply protections and command the control surfaces.
Side-sticks free up space in front of each pilot and make the cockpit feel less cluttered. Pilots coming from conventional control columns need to adapt, particularly in crosswind landings and when the other pilot is flying.
Avionics and automation
- Flight management system: stores the flight plan, computes performance and guides the aircraft laterally and vertically.
- Autopilot and autothrottle: reduce workload on climb, cruise and approach.
- Alerting systems: warnings and cautions presented on the engine and alert display.
- Safety equipment: terrain and traffic alerting are standard on modern airliners; confirm the exact fit with the operator.
Manufacturer and supplier names, and the exact software standard, vary with aircraft age and configuration. For the wider aircraft picture, see the Superjet 100 overview.
Workload and human factors
Modern glass cockpits reduce workload but add mode-awareness risks. Crews must understand what the automation is doing, brief the approach and monitor instruments actively.
- Use standard callouts for mode changes.
- Cross-check the flight plan against clearances.
- Fly manually when automation behaves unexpectedly.
- Keep the pilot monitoring engaged, not just a spectator.
These practices come from crew resource management and are described by bodies such as SKYbrary and ICAO.
Typical phases of flight on the SSJ100 flight deck
- Pre-flight: set up the FMS with the flight plan, check displays and system status, and brief the departure.
- Take-off and climb: engage automation after the initial climb, and monitor mode changes.
- Cruise: manage fuel, weather and navigation, and keep the monitoring pilot engaged.
- Approach: brief the arrival, set the approach in the FMS, and cross-check altitudes and speeds.
- Landing: disconnect automation as required and land using side-stick inputs.
These phases mirror those on other jets, so skills learned on any modern aircraft transfer well. The precise normal procedures are in the operator's flight crew operating manual.
How it compares with other regional jets
Compared with the Embraer E-Jets and CRJ family, the Superjet offers a more modern flight deck with fly-by-wire protections in a similar size class. The trade-off is a smaller global parts and support network. For comparison tables, read Superjet 100 vs other regional jets.
What this means for your pilot career
The SSJ100 is a good example of the glass cockpit and side-stick systems you will meet on A320-family aircraft and other airliners. Learning how such flight decks work helps in the technical general and navigation papers you will study for a CPL.
Our DGCA CPL ground classes cover those subjects, and the Superjet 100 pilot guide explains how type training works. Also see CPL technical general.
Sources and official references
- SKYbrary – aviation safety knowledge base (accessed October 2026)
- ICAO – International Civil Aviation Organization (accessed October 2026)
- Sukhoi Superjet 100 – Wikipedia (accessed October 2026)
- DGCA – Directorate General of Civil Aviation, India (accessed October 2026)
Next steps
Want a clear plan for your own pilot career? Our counsellors can explain DGCA CPL and ATPL ground classes, airline preparation and cadet-programme preparation for your situation. Message us on WhatsApp on +91 7428897782 or ask for a free counselling call.
Talk to a counsellor on WhatsAppReviews & Discussion
Write a review
No reviews yet. Be the first!
