ATR 72 Pilot Career and Maintenance Requirements
An ATR 72 pilot career in India usually starts with a DGCA CPL, instrument and multi-engine ratings and an ATR 72 type rating, followed by a first officer role with a regional operator. Maintenance is done by licensed engineers under an approved programme, while pilots check the aircraft before flight and report defects.
This page explains both sides: how you reach the ATR cockpit and what the maintenance system means for your daily work.
Updated October 2026 · Editorial team, Golden Epaulettes Aviation
Key facts
- Aircraft: ATR 72 is a twin-engine regional turboprop airliner built by ATR.
- Entry route: CPL with IR and ME ratings, ATR type rating, first officer role.
- Medical: DGCA Class 1 required.
- Maintenance: licensed engineers perform line and base maintenance under an approved programme.
- Pilot duties: walk-around, tech log entries, MEL compliance, reporting defects.
- Growth: first officer to captain, then instructor or larger aircraft.
Why the ATR 72 matters for pilots
The ATR 72 is a regional turboprop used for short, frequent sectors, which gives new first officers many take-offs and landings and plenty of instrument flying. The manufacturer's official page is the ATR website.
Indian operators of the ATR family have included IndiGo and Alliance Air. Check the airlines' official career pages for current openings and requirements.
Qualifications and path to the ATR cockpit
- Complete 10+2 with Physics and Mathematics.
- Obtain a DGCA Class 1 medical and a computer number.
- Clear the DGCA theory papers and RTR(A), and complete flight training for a CPL.
- Add instrument and multi-engine ratings.
- Complete the ATR 72 type rating in a simulator.
- Pass airline selection and join as a first officer.
Our guide to commercial pilot licence covers the first steps, and ATR 72 pilot training describes the type rating. The licensing rules are on the DGCA website.
Pilot responsibilities on the ground
Pilots are not maintenance engineers, but they are the first line of defence for aircraft condition. Before each flight the crew checks the technical log, reviews open defects and performs an external walk-around.
- Review the aircraft technical log and any deferred defects.
- Check that any inoperative equipment is permitted by the Minimum Equipment List (MEL).
- Do the external inspection, including propellers, tyres, control surfaces and leaks.
- Record every defect found in flight clearly in the technical log.
Related reading: ATR 72 pre-flight checklist.
How ATR 72 maintenance is organised
| Level | What it covers | Who does it |
|---|---|---|
| Line maintenance | Daily or transit checks, simple defect rectification | Licensed engineers at the airport |
| Periodic checks | Scheduled inspections at set intervals (such as A-checks) | Approved maintenance organisation |
| Base maintenance | Heavy inspections, structural checks and modifications | Approved base maintenance facility |
Intervals and tasks come from the manufacturer's maintenance planning data and the airline's approved programme, overseen by the regulator. Airlines also follow airworthiness directives published by authorities such as EASA. Do not treat any generic interval as an actual requirement.
Safety culture and reporting
Reliable operation depends on pilots and engineers sharing accurate information. Clear defect descriptions help engineers fix the right problem the first time and avoid repeat faults.
Related guides cover ATR 72 pilot challenges and weather considerations.
What the ATR 72 type rating includes
A type rating is the training that authorises you to operate one aircraft type. For the ATR 72 it combines ground school on systems with sessions in a full-flight simulator and ends with a skill test.
- Systems: engines and propellers, electrical, hydraulic, fuel, flight controls and ice protection.
- Normal procedures, checklists and standard operating procedures.
- Abnormal and emergency drills, including engine failure and fire; see ATR 72 emergency landing procedures.
- Crew coordination and decision-making in a two-pilot cockpit.
- A skill test with a DGCA-authorised examiner or the approved training organisation.
Duration and cost vary by provider and airline, so ask for the syllabus and a written quote before committing. Many airlines hire first and sponsor or arrange the type rating, so check conditions such as bonds.
Skills regional airlines look for
- Strong instrument flying and basic aircraft handling.
- Clear radio communication and good English.
- Discipline with checklists and standard procedures.
- Teamwork, calm decision-making and the ability to learn quickly.
- Solid grasp of Physics-based subjects such as aerodynamics and systems.
These are tested through written exams, aptitude tests, simulator checks and interviews. Early practice with navigation and technical theory helps at every stage.
Career progression
| Stage | Typical role |
|---|---|
| Early | First officer on ATR 72 with a regional operator |
| Mid | Senior first officer, then captain after the required hours and command course |
| Later | Line instructor, examiner or move to larger aircraft |
Timelines depend entirely on the airline and the market, so treat any promise of a fixed promotion date with caution.
What this means for your pilot career
If you want regional airline flying, plan for CPL, IR and ME ratings and then a type rating. Airline selection tests often include aptitude, psychometric and simulator assessments.
Golden Epaulettes Aviation offers ground classes and airline preparation in Dwarka and online; we do not provide flying training or type ratings. See DGCA CPL ground classes, airline preparation classes and ATR 72 pilot jobs.
Sources and official references
- ATR website (accessed October 2026)
- DGCA website (accessed October 2026)
- EASA (accessed October 2026)
Next steps
If regional airline flying is your goal, message us for free counselling on DGCA exams and airline selection preparation.
Talk to a counsellor on WhatsAppReviews & Discussion
Write a review
No reviews yet. Be the first!
