Boeing 737 Automation: Autopilot, FMS, Autothrottle and Pilot Training
Boeing 737 automation is a set of flight deck systems, mainly the autopilot, flight director, Flight Management Computer (FMC), autothrottle and navigation displays, that fly the planned route, control speed and thrust, and reduce workload. The pilots remain responsible for monitoring the aircraft, choosing the correct mode and taking over when needed. Details vary by variant, so always follow your airline's manuals.
Updated October 2026 · Editorial team, Golden Epaulettes Aviation
Key facts: Boeing 737 automation
- Core systems: autopilot, flight director, autothrottle, FMC with CDU, and navigation displays.
- Control philosophy: pilots set targets on the Mode Control Panel; automation follows them.
- Not fully fly-by-wire: the 737 retains conventional hydraulic flight controls with manual reversion.
- Variants: 737 NG and 737 MAX share principles but differ in displays and some system details.
- Pilot role: monitor mode annunciations, intervene early, and hand-fly when appropriate.
- Training: type-rating courses cover automation modes and failure management in the simulator.
What automation means on the 737
Automation on a Boeing 737 refers to computers and servos that control the aircraft's path, speed and thrust under pilot supervision. It does not replace the crew. It handles routine tasks so pilots can monitor, plan and respond to changes.
The 737 has flown since the 1960s, and its automation has evolved from simple autopilots to modern glass cockpits with an FMC, GPS navigation and head-down displays. Read our Boeing 737 history for the full background.
Main 737 automation systems
| System | What it does | Pilot interaction |
|---|---|---|
| Autopilot (A/P) | Controls pitch, roll and, on some modes, approach tracking | Engage or disengage; select modes on the Mode Control Panel (MCP) |
| Flight Director (F/D) | Shows guidance bars for the pilot to follow | Use in manual or automatic flight |
| Autothrottle (A/T) | Sets thrust for climb, cruise and approach to hold target speed | Arm or disarm; watch mode annunciations |
| Flight Management Computer (FMC) | Holds the route, performance data and VNAV/LNAV guidance | Enter route and performance data on the CDU |
| Navigation (GPS / IRS) | Provides position and navigation accuracy | Cross-check with radio aids as required |
| Displays | Primary flight and navigation displays, engine data | Monitor modes and flight path |
How the automation modes work together
Pilots command the aircraft by selecting modes. Lateral modes such as LNAV or HDG SEL steer the aircraft, while vertical modes such as VNAV, LVL CHG, V/S or ALT HLD manage altitude and climb or descent. The autothrottle adds speed or thrust control.
The key skill is mode awareness: knowing which mode is active, what it will do next and whether it matches your intention. Mode confusion is a recognised risk in all automated cockpits.
Approach and landing
The autopilot can fly instrument approaches, tracking the localiser and glideslope, and the 737 can be certified for low-visibility autoland operations. Crews follow airline procedures and regulator approvals for each approach category.
On many flights, pilots hand-fly the final approach for proficiency, subject to company policy. See our Boeing 737 flying tips for practical advice.
Automation and safety
Automation reduces workload and improves precision, but over-reliance is a known risk. Accident investigations around the world, including those involving the 737 MAX's MCAS system, have prompted changes to design, training and procedures.
Regulators now emphasise manual flying skills, mode monitoring and clear information about system behaviour. Our Boeing 737 safety guide goes deeper, and the manufacturer's 737 MAX page describes the current model.
Common automation pitfalls
- Mode confusion: assuming the autopilot is in the mode you expect without checking annunciations.
- Autothrottle disconnect: thrust stops following the target after an unnoticed disconnect, so speed drifts.
- FMC data errors: wrong waypoints, constraints or performance data lead the aircraft astray.
- Skill fade: too little manual flying makes it harder to take over in an abnormal situation.
- Silent surprises: unexpected mode changes in VNAV during descent or approach, which good briefings can catch.
The fix is simple in principle: brief the plan, verify each mode change, and keep a policy of when to reduce the level of automation. See our overview of the 737-800 on SKYbrary for background.
Learning 737 automation as a student pilot
- Master basic instruments and aircraft systems first, since automation builds on them.
- Learn the MCP and mode logic from a systems manual and then the simulator.
- Practise scan flow: check mode annunciations, then flight path, then speed and thrust.
- Practise manual flying and raw-data navigation so you can step down a level of automation.
- During type rating, expect a ground school plus full-flight simulator sessions with failures.
See our guides on Boeing 737 type rating and how to become a Boeing 737 pilot.
What this means for your pilot career
Airline interviews and simulator assessments test whether you can manage automation, not just fly the aircraft by hand. A strong foundation in instruments, navigation and aircraft systems is the best preparation. In India, the 737 is flown by operators such as Akasa Air, SpiceJet and Air India Express, so this knowledge is directly relevant.
Prepare with our DGCA CPL ground classes and airline preparation classes.
Sources and official references
- Boeing – 737 MAX overview (accessed October 2026)
- SKYbrary – Flight Management System (accessed October 2026)
- SKYbrary – Boeing 737-800 (accessed October 2026)
- DGCA India (accessed October 2026)
Next steps
Our instructors help you build the systems and navigation knowledge that airline assessments test, and we prepare you for the simulator stage. Message us on WhatsApp at +91 7428897782 to book a free counselling call.
Talk to a counsellor on WhatsAppReviews & Discussion
Write a review
No reviews yet. Be the first!
